Automatic tapping machine tapping tooth why can be unstable?

Automatic tapping machine tapping tooth instability mainly has the following reasons:

1, automatic tapping machine tapping tip wear or slack spring weak. First of all, check whether the automatic tapping machine tapping tip wear leads to uneven stress, and then check whether the spring is too relaxed or whether a new spring needs to be replaced.

2, automatic tapping machine tapping belt adjustment is not tight or belt damage resulting in skid. Check whether the tapping triangle belt of the automatic tapping machine is too loose. If it is loose, adjust the conditioning screw behind the machine to the appropriate condition or replace the new belt.

3, automatic tapping machine tapping teeth small belt is too loose. The four small screws fixing the automatic tapping machine can be loosened, and then the automatic tapping machine downward pressure, and then tighten the four small screws.

4. The micro switch is damaged. Replace the new micro switch.

5, CAM stop switch wrong orientation. If the start is too slow will also lead to the automatic tapping machine tapping teeth instability.

6, data deformation or excessive residue in the chuck. Check the data and clean the chuck regularly and frequently.