Daily maintenance of tapping machine?

Tapping machine is often used, but also need to maintain, regularly clean the linoleum and cooling pump, check the coolant pipeline, clean the dust inside and outside the motor and electrical box, check the oil quality, oil quantity meet the requirements. After a period of use in daily operation, the torque setting should be adjusted. Here is a small series to give you a detailed introduction to the daily maintenance of tapping machine, what are the matters needing attention?

How to maintain daily?

1. The appearance and dead Angle of the tapping machine tool are dismantled and cleaned. The inside and outside are required to be clean, no rust, no yellow robe, and the paint is the natural iron and the light. Clean the guide rail surface and remove burrs from the working surface. Check the fixing screw, hand ball, hand plate, check the flexibility of each handle.

2, tapping machine spindle feed box maintenance: check the oil quality, maintain good, oil quantity meets the requirements. Remove burrs from spindle cone holes. Clean hydraulic variable speed system, oil filter net, adjust oil pressure.

3, tapping machine rocker arm and lifting clamping mechanism inspection: check the adjustment of lifting mechanism and clamping mechanism to achieve sensitive stability.

4. Check the cooling system of tapping machine: clean the cooling pump, filter and coolant tank. Check that the coolant pipe does not leak.

5, tapping machine lubrication system inspection: cleaning linoleum, the oil cup is required to be complete, the oil circuit is smooth, the oil window is bright.

6, tapping machine electrical system inspection: clean the dust inside and outside the motor and electrical box. Turn off the power, open the door cover, and check whether the electrical connector and electrical components are loose or aging. Check whether the limit switch works properly. Open the door and power off whether to play a role. Check whether the hydraulic system is normal and whether there is oil leakage. Whether the electrical control switch is normal.